BSI & European Standards
Ensuring compliance of products and materials with British standards, also conducting tests to comply with European directives and regulations.
This extensive range of standards ensures RTRC Limited supports industries globally by verifying the quality, safety, and compliance of products to meet specific regional and international demands.
Complete Testing Facilities As Per BSI & European Standards Cables & Conductors
| Specification | Product |
|---|---|
| BS 5467 | Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V for fixed installations |
| BS 6004 | PVC Insulated and PVC Sheathed cables for electric power and lighting |
| BS 6195 | Rubber or silicone rubber insulated flexible cables and cords for coil end leads |
| BS 6231 | Single core PVC insulated flexible cable for switchgear and control gear wiring |
| BS 6622 | Armoured Cables with Thermosetting Insulation for rated voltages from 3.8/6.6 kV to 19/33 kV |
| BS 6724 | Thermosetting insulated, armoured cables of rated voltages of 600/1000 V and 1900/3300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire |
| BS 7211 | Thermosetting insulated and Thermoplastic Sheathed cables for electric power, lighting and having low emission of smoke and corrosive gases when affected by fire. |
| BS 7629-1 | 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire – Part 1: Multicore and multi pair cables |
| BS 7655-4.2 | Insulating and sheathing materials for cables. PVC sheathing compounds |
| BS 7835 | Armoured Cables with Thermosetting Insulation having low emission of smoke and corrosive gases when affected by fire |
| BS 7846 | Thermosetting insulated, armoured Fire Resistant cables having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-1 | LV and MV polymeric insulated cables for use by distribution and generation utilities |
| BS 7870-2 | LV and MV polymeric insulated cables for use by distribution and generation utilities |
| BS 7870-3.10 | PVC Insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-4.10 | Distribution Cables (Single Core) with extruded insulation of rated voltages of 11 kV to 33 kV |
| BS 7870-4.20 | Distribution Cables (Three Core) with extruded insulation of rated voltage of 11 kV to 33 kV |
| BS 7870-5 | Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
| BS 7870-8.1 | Single wire armoured and PVC sheathed multicore cable with copper conductors |
| BS 7870-8.2 | Single Wire Armoured and PVC Sheathed Multipair Cable with Copper Conductors |
| BS 7870-8.3 | Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.4 | Single Wire or double steel tape armoured and PVC Sheathed multipair cable with copper conductors, having reduced fire propagation performance low emission of smoke |
| BS 7870-8.5 | Single wire armoured and unarmoured multicore cables with copper conductor and non-halogenated sheath |
| BS 7870-8.6 | Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
| BS 7889 | Thermosetting Insulated, non-armoured cables with a voltage of 600/1100 V for fixed installations |
| BS 8434-2 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits – BS EN 50200 with a 930OC ame and with Water/Mechanical Shock (Classification – 120 Minutes) |
| BS 8491 | Method for assessment of fire integrity of large diameter power cables (Fire with Mechanical Shock & burst of Water Jet) Category-30 Minutes, 60 Minutes, 90 Minutes & 120 Minutes |
| BS EN 10244-1 | Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings |
| BS EN 10244-2 | Steel wire and wire products.- Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings |
| BS EN 10257-1 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables or Land cables |
| BS EN 13501-6 | Fire classification of construction products and building elements – Classification using data from reaction to fire tests on power, control and communication cables |
| EN-50182 | Conductor for overhead lines – Round wire concentric lay stranded conductors |
| BS EN 50200 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50214 | Flat Polyvinyl Chloride Sheathed Flexible Cables |
| BS EN 50288-7 | Multi Element Metallic Cables Used in Analogue and Digital Communication and Control |
| BS EN 50289 | Communication Cables |
| BS EN 50305 | Railway rolling stock cables having special fire performance. Test methods |
| BS EN 50363 | Insulating, sheathing and covering materials for low voltage energy cables |
| BS EN 50395 | Electrical test methods for low voltage energy cables |
| BS EN 50396 | Non-electrical test methods for low voltage energy cables |
| BS EN 50397-1 | Covered Conductors for overhead lines and related accessories for rated voltage above 1 kV ac and not exceeding 36 kV ac covered conductors |
| BS EN 50399 | Common test methods for cables under fire conditions – Heat release and smoke production measurement on cables during flame spread test |
| BS EN 50525-1 | Electric Cables. Low voltage energy cables of rated voltages up to and including 450/750 V |
| BS EN 50525-2-11 | Low voltage energy cables of rated voltages upto and including 450/750 V – Cables for general applications. Flexible Cables with Thermoplastic PVC Insulation |
| BS EN 50525-2-21 | Low voltage energy cables of rated voltages up to and including 450/750 V – Cables for general applications. Flexible Cables with cross-linked elastomeric insulation |
| BS EN 50525-2-31 | Low voltage energy cables of rated voltages upto and including 450/750 V – Cables for general applications. Single Core non-sheathed cables with thermoplastic PVC Insulation |
| BS EN 50525-2-41 | Low voltage energy cables of rated voltages upto and including 450/750 V – Cables for general applications. Single core cables with crosslinked silicone rubber insulation |
| BS EN 50525-2-42 | Low voltage energy cables of rated voltages up to and including 450/750 V – Cables for general applications. Single core non-sheathed cables with crosslinked EVA insulation |
| BS EN 50525-2-83 | Low voltage energy cables of rated voltages upto and including 450/750 V – Cables for general applications. Multicore Cables with cross-linked Silicon Rubber insulation |
| BS EN 50525-2-51 | Low voltage energy cables of rated voltages up to and including 450/750 V – Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation |
| BS EN 50525-3-41 | Low voltage energy cables of rated voltages up to and including 450/750 V – Cables with special fire performance. Single Core non-sheathed cables with halogen-free cross-linked insulation |
| BS EN 50264-3-1 | Railway applications- Railway rolling stock power and control cables having special fire performance |
| BS EN 50264-3-1 | Railway applications- Railway rolling stock power and control cables having special fire performance |
| BS EN 50575 | Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements |
| BS EN 50618 | Electrical Cables for photovoltaic system |
| PAS 5308 (Part-1) | Polyethylene insulated, thermosetting sheathed cable |
| PAS 5308 (Part-2) | PVC insulated control and instrumentation cable |
Other Services
We are an internationally recognized testing laboratory, providing high-quality testing services to clients in over 20 countries.
RTRC Limited offers insulating oil testing services to assess the performance, safety, and longevity of transformer oils.
RTRC Limited has advanced and updated testing facilities for RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) compliance.
During the past many years, RTRC Limited has been a support to the stakeholders like Regulatory Agencies, Refineries, Chemical suppliers, Industry Units, Certifying Agencies, Research Institutions & Universities by performing
RTRC Limited provides state-of-the-art testing solutions for the metal-producing industries, ensuring precise analysis of metal purity and chemical composition.
Wastewater testing is the process of testing the wastewater released from the industries or the households for the presence of harmful toxic contaminants and disease-causing pathogens.
Salt spray testing, also known as salt fog testing or corrosion testing, is a widely recognized method to evaluate the corrosion resistance of materials and surface coatings.